Amped Wireless APA20 - High Power 700mW Dual Band AC Wi-Fi Access Point - Manual (Page 36)

APA20 USER’S GUIDE
35 35
NETWORK SETTINGS
IP Address: The IP address of the Access Point.
Subnet Mask: The subnet of the Access Point.
Default Gateway: The access point to another network,
normally your router.
DHCP: The Access Point includes a feature to help manage
the IP addresses within your network automatically. When
connected to a network, the Access Point will obtain an IP
address from your router and act as a DHCP Client.
However, when there is no connection available, the
Access Point will act as a DHCP Server. You may also
manually control the IP settings of the Access Point by
choosing Client, Server or Disabled / Static IP from the
DHCP drop down menu. This is only for advanced users.
Note: If you choose to use a Static IP address for the Access Point, you will no longer be able to access the web
menu using http://setup.ampedwireless.com . You must use the assigned IP address to acces the web menu.