Amped Wireless APA20 - High Power 700mW Dual Band AC Wi-Fi Access Point - Manual (Page 59)

APA20 USER’S GUIDE
58 58
To Map the network drive:
a. Open
Finder.
b. From the menu on the top of the desktop, select Go.
c. Select Connect To Server from the drop down menu.
d. Enter the address of the network drive: AMPED_AP_USB or AP’s IP address, then click Connect .
The Access Point freezes or I cannot access the web when a USB storage device is connected.
a. Remove the USB storage device from the Access Point and reboot it by unplugging the power adapter. Once
rebooted, try inserting the USB storage device again.
b. Make sure your USB storage device is not corrupted and is working properly and try again.
Additional USB Storage troubleshooting tips may be available online at the Amped Wireless Elite Support
Center. Please check the Elite Support Center for the latest updates and features for USB Storage support.
My Wireless Access Schedule is being erratic and not working at the correct times.
a. You need to adjust your Time Zone Settings from the Management web menu page.
Wi-Fi Protected Setup (WPS) is not working. Push button configuration does not detect the connection.