Ericsson LBI-39224 - Manual (Page 153)

LBI-39224
3-123
replaced with the current configuration. If the CEC/IMC Manager is
running remotely or as a part of the EDACS Network Manager, this
configuration is saved on the CEC/IMC Manager server, typically local
to the CEC/IMC; it is not saved at the remote location.
Save As...
Choose the Save As… button to allow the currently selected console
configurations to be saved as a different console. It is provided to
speed configurations when similar console configurations are required.
Upon choosing
Save As… a small dialog box will appear which
allows entry of a new console number. Do not type a number in the
Save As drop-down list box, the console number must be selected from
a number in the drop-down list. Like
Save , Save As… stores console
configuration on the CEC/IMC Manager server.
Close
Choose the Close button to exit the
C3 Maestro Hardware Configuration dialog box and return to the
CEC/IMC Manager main window. If any changes have been made and
not saved, you will be prompted (
Write Changes to Disk? ) to save
and exit ( Yes ), exit without saving ( No ), or cancel the Close
command and remain in the dialog box ( Cancel ).
Digital Console Pre-empt
Digital console pre-empt allows for console pre-empting of digital calls.
This feature may require Site Controller or GETC interface and radio
software changes, refer to the compatibility matrix in Release Notes
350A1874 for specific information. This feature should be disabled
from the CEC/IMC Manager and left in the disabled state. From the
CEC/IMC Manager menu bar select
Configure System /
System Options / Digital Console Pre-empt to display the
System Options dialog box. The Digital Console Pre-empt check box
should be unselected (unchecked) to disable this feature. Select the
check box to enable Digital Console Pre-empt if desired and supported.
3.11.4 Console Privilege Lists
Each console has a privilege list that defines its specific privileges.
From this list, a CEC/IMC Manager user can grant or deny a console
access to specific units, groups, and conventional channels. For
example, a non-supervisory C3 Maestro console which is denied access
to a group will not be able to add the group to a module. This function