Ericsson LBI-39224 - Manual (Page 42)

LBI-39224
3-12
GSCMOM.EXE off-line programs as described in Chapter 5, OFF-
LINE DIAGNOSTIC FUNCTIONS.
If data logging is desired, select the Enable Datalog check box. With
this feature enabled the CEC/IMC Manager will log GSC traffic such as
channel assignments and drops.
The datalog delete threshold feature automatically deletes old datalog
files which are stored on the CEC/IMC Manager's hard disk drive. A
stored datalog file that is older than the number of days in the Datalog
Delete Threshold will be deleted at midnight. This prevents hard disk
drive "disk full" errors. Datalog files will also be deleted if the Datalog
Delete Threshold number is reduced. For example, if the previous
number was "8" (8 days) and the number is reduced to "5" (5 days) in
the
CEC/IMC Manager Configuration dialog box, the three datalog
files that are more than 5 days old will be deleted from the hard disk
drive at midnight. The range for the Datalog Delete Threshold number
is 1 to 50. The value selected here should be at least equal to the
number of days between back-ups of the datalog files such that they are
saved before the CEC/IMC Manager automatically deletes them from
the hard disk drive. ERROR.DLG and WARN.DLG files are not
affected by the Datalog Delete Threshold setting.
OK
Choose the OK button to save any new settings, activate those settings,
and exit the CEC/IMC Manager Configuration dialog box.
3.5 SYSTEM TIME AND DATE
This function is used to select the source of system time and date. This
time and date is broadcast throughout the entire CEC/IMC for time
synchronization. This function is performed from the
Configure System Clock Synchronization dialog box. From the
CEC/IMC Manager menu bar select Configure System /
System Options / System Clock to display the
Configure System Clock Synchronization dialog box, Figure 9.