Ericsson LBI-39224 - Manual (Page 80)

LBI-39224
3-50
selecting T1/E1 Interface will activate the
T1/E1 Digital Site Configuration dialog box. These options are
discussed in detail in subsequent sections.
Audio Board Equipped NIM Configuration
This section describes configurations for channels within Audio Board-
equipped NIMs. All channel parameters are configured from the (NIM)
Site Channel Configuration dialog box, Figure 21. Only those NIMs
which were selected in the Site Channel Configuration List dialog
box are available for channel configuration. Select the desired NIMs to
configure from the Configured/Active Sites list, or add the desired
NIMs from the Configurable Sites list, if not already listed, as described
earlier. Choose
Modify and the Audio Interface Type dialog box,
Figure 14 on page 3-27, will be displayed, select the Audio Board
option, then choose
OK to display the Site Channel Configuration
dialog box, Figure 21. The selected NIMs are displayed in a list box at
the top center of the dialog box. Audio Board-equipped NIMs require
less settings than Audio Board-equipped MIM, VMIM and PIM
interface modules.
Figure 21 NIM Site Channel Configuration Dialog Box
Help
Choose the Help button to access the Help function. (Help is also
available by pressing the F1 key.)