Amped Wireless SR10000 - High Power Wireless-N 600mW Range Extender - Manual (Page 15)

SR10000 USER’S GUIDE
14 14
Connect to the new Extended Network
During the countdown process, the Range Extender
will reboot and disconnect the Wi-Fi connection. At
this point, you will need to reconnect your PC or tablet
to the new Extended Network. Follow the instructions
on the screen to connect to the Extended Network.
Once you have connected, click the check box to
confirm. The
Next button will appear allowing you to
complete the setup process.
If there are problems with your configuration, the
Wizard will inform you to rescan for a network to
extend.
If there are no problems, you will see the Setup
Summary on the following page.