Amped Wireless SR10000 - High Power Wireless-N 600mW Range Extender - Manual (Page 46)

SR10000 USER’S GUIDE
45 45
d. Make sure that your Home Network’s Wi-Fi SSID is broadcasting and not hidden. If your Home Network
SSID is hidden, you will need to manually setup the Range Extender through the Wi-Fi Settings > Home
Network Settings menu.
My Range Extender was working fine previously but now I can no longer access the Internet through the Range
Extender. Or, I had a
POWER OUTAGE and now the Range Extender no longer works.
a. The connection to your Home Network has been dropped. This can be caused by several events to your
home Wi-Fi connection. When this occurs, simply run the Wizard again from the web menu and
reconfigure the Range Extender.
b. The Range Extender automatically reconfigures itself in the event of a channel change on your router.
However, in the case that it does not, check to see that your home Wi-Fi router settings have not
changed. Any changes to the SSID, security, or channel number from the original settings will disconnect
the Range Extender’s connection to the home network. A power outage can cause a change in the
channel of your router. To solve this simply run the Wizard again from the web menu and reconfigure
your Home Network connection. You can also set a static channel number on your router to prevent
this from happening again in the future.
c. If you cannot access the web menu, check to see that your Range Extender is still on. Reboot the Range
Extender by unplugging the Range Extender and plugging it back in. Check to see if your connection has