ARM Electronics DVRHD - Manual (Page 32)

DVR User’s Manual
31
3.7.4 Email Attachment
The function allows the DVR to send out a brief AVI video regarding the event.
The number of the attached AVI video will be equivalent to the number of
cameras connected to the DVR. For example, if the DVR has been
connected with 8 cameras, then 8 videos will be attached to the notice email.
The total size of the video will be about 2 MB. Select <ON> to enable this
function; or <OFF> to disable it.
NOTE: The video clips of the Email Attachment will ONLY be in *.avi
format. Please download the Divx Player from
www.divx.com to play
the *.avi files.
3.7.5 Alert Notification Setup
This function allows users to send alert notifications to the CMS software
which had been installed to users’ computer. For further setup instruction at
the CMS side, please refer to the CMS user’s manual.
Alert Notification Setup
Alert Configuration Set
Alert Notification
Alert IP
Alert Port
Alive Interval 1
OFF
0.0.0.0
9999
120 Sec
3.7.5.1 Alert Configuration Set
<Alert Configuration Set> provides 3 combinations of Alert Notification, IP,
Port, and Interval.
3.7.5.2 Alert Notification
4 options are included in this item: <OFF>, <Event>, <Alive>, and <Both>.
<OFF>: The Alert Notification is turned off.
<Event>: When the alarm is triggered, the DVR will send an alert message to
the CMS.
<Alive>: The DVR will send an alive message to the CMS every N second
just to show you that the connection between the DVR and CMS is
in effect. The time interval N can be adjusted in <Alive Interval>.
<Both>: This enables the DVR to send both Event and Alive alert messages
to the CMS.