ARM Electronics DVRHD - Manual (Page 43)

DVR User’s Manual
42
4.4 Video Export
The unit allows users to export wanted video to the built-in DVD+RW or an
external storage device, such as a USB ThumbDrive, and the exported video
will be saved as *.drv file. Note that the system log will keep records of all
video exportations, including duration, start time, and end time.
If the video is to be exported to an external device, make sure the device is
connected to the DVR unit and the port has been set appropriately for video
export.
NOTE: Once an external device is connected to the DVR unit, the
device has priority over the built-in DVD+RW. That means the video
will be exported to the external device instead of the built-in DVD+RW.
According to the size of video, the exporting process may take about 10
minutes to 1 hour.
4.4.1 ezBurn Introduction
Built with the ezBurn technology, ezBurn function provides users the easier
way to export desired video with built-in DVD+RW or to an external device,
such as an USB ThumbDrive
® .
TWO keys (SEARCH and COPY) and THREE touches are all what’s needed
for completing the export. The entire exporting process will be done through
the front panel, without needing to enter the OSD setup menu.
The ezBurn exporting process is illustrated as below figure:
The entire process is described step by step in the following sections.
NOTE: The file exported using ezBurn will be in .drv file format, and
it can only be played using the remote player software.