2 playback – ARM Electronics RT8-16CD User Manual
Page 29
BASIC OPERATION
-24-
4.2 Playback
Press “PLAY” button on the front panel, and the device will display the last recorded video.
Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the device
will stop playback. For example, if the IPS is set to 30, the recording time should be at least 273
seconds (8192 images / 30 IPS) for the playback to work properly.
Playback related operations are described below:
‧ Fast Forward ( ) / Fast Rewind ( )
You can increase the speed for fast forward and rewind on this device.
In the playback mode:
Press “ “ once to get 4X speed forward and press twice to get 8X speed, etc. And the maximum speed is 32X.
Press “ “ once to get 4X speed rewind and press twice to get 8X speed, etc. And the maximum speed is 32X.
Note: During playback, the type of the recording image size (Frame or CIF) will also be shown on the screen.
‧ Pause (
) / Image Jog
Press “
“ button to pause the video playback.
In the Pause mode:
Press “
“ button once to get one frame forward.
Press “
“ button once to get one frame rewind.
‧ Stop (
)
Pressing “
” button under all circumstances will return this device to live monitoring mode.
‧ Channel Display Mode
You can change the channel display in the following ways:
Display mode:
8CH: Press “
” button to show the 4 / 8 / 9 channel display modes.
16CH: Press “
” button to show the 4 / 8 / 9 / 16 channel display modes.
Full screen view:
Press one of the number buttons from 1-8 (for 8CH) or 1-16 (for 16CH) to show the selected channel in the full
screen.
‧ Channel Display Position
Under the live mode, you can switch the positions of two channels in the
following way:
Step1: Press “Set” to highlight one channel.
Step2: Press “UP“, “DOWN”, “LEFT”, “RIGHT” button to move the highlight to the
channel you want to change its position.
Step3: Press “
＋” or “－” to select the channel you want to switch its position with
the one selected in Step2.
Step4: Press “ENTER” button to confirm the setting. For example, the position of CH4 & CH12 is switched as shown
on the right side.
01
02
03
12
05
06
07
08
09
10
11
04
13
14
15
16
Under Live Mode
files without this message by purchasing novaPDF printer (