ARM Electronics RT8-16CD - Manual (Page 81)

LICENSED SOFTWARE AP
-76-
16) RECORD QUALITY
4 options are available from the drop-down menu: BEST, HIGH, NORMAL and BASIC.
17) TOTAL IPS SHARE
Choose the total IPS share as FIX or GROUP. The more IPS one channel gets, the more smoother the recorded video
will be played.
Press “APPLY” to confirm the setup, or “EXIT” to quit without saving.
7.5.3 Alarm
In “Alarm” and its sub-menu “Alarm List”, you can activate the alarm-trigger function, view the detailed information of
alarm events, and play the event recording.
Press “Alarm”, and you will see the following options:
‧ Alarm Trigger
Select to turn the alarm-trigger function on (Enable) or off (Disable).
‧ Alarm Method
Select the notification methods when any alarm is triggered: Email and / or FTP.
a) Email
When this option is checked, MJPEG pictures will be saved in the path assigned in “General”  “File Path” 
“Snapshot Path” and a copy will also be emailed to the E-mail address assigned in “Network”  “Mail” if any alarm is
triggered.
b) FTP
When this option is checked, MJPEG pictures will be saved in the path assigned in “General”  “File Path” 
“Snapshot Path” and a copy will also be uploaded to the FTP address assigned in “Network”  “FTP” if any alarm is
triggered.
‧ Post Numbers
Set the number of MJPEG pictures (1-10) which will be sent with the chosen alarm method(s).
‧ Alarm Duration
Set the duration time of motion trigger recording (5 SEC / 10 SEC / 20 SEC / 40 SEC).
‧ Auto switch to alarm video
Check this option to immediately switch to the channel that an alarm event is triggered and see the live view.
‧ Alarm Refresh
Press to clear the alarm icon “ ” shown on the screen.
Create PDF files without this message by purchasing novaPDF printer ( http://www.novapdf.com )