ARM Electronics RT8-16CD - Manual (Page 50)

MENU FUNCTION
-45-
‧ PPPOE
This PPPoE function needs to have one “username” and one “password” subscribed from one ISP supplier.
For detailed PPPoE settings, please follow the AP (Licensed Software AP) setup, and then refer to the section
“3.6.4 Dynamic IP － DHCP” at page 19, and “(1) DDNS” in section “7.5.1 Network” at page 67.
‧ DHCP
The DHCP function needs to be supported by a router or a cable modem network with DHCP services.
For detailed DHCP settings, please follow the AP (Licensed Software AP) setup, and then refer to the section “3.6.3
Dynamic IP － PPPOE” at page 17, and “(1) DDNS” in section “7.5.1 Network” at page 67.
Note: DHCP and PPPoE network types need to apply DDNS services to get “Hostname” to correspond to the
dynamic IP address. For detailed DDNS settings, please refer to “(1) DDNS” in section “7.5.1
Network” at page 67.
2) DNS
Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).
3) PORT
The valid number ranges from 1 to 9999. The default value is 80.
Note: Typically, the TCP port used by HTTP is 80. However in some cases, it is better to change this port
number for added flexibility or security.
6.4.8 Backup
In this menu list, you can choose to make a copy for a specified period time to a compatible USB flash drive or a CD
or DVD for your own purpose.
The backup file can be played directly in your PC via the supplied licensed software AP, or via other media players (ex:
Windows Media Player or RealPlayer) after the file is converted to “AVI” format. For detailed AP playback, please refer to
the section “7.4 Playback Operation” at page 63.
Move the cursor to “BACKUP”, and press ”ENTER”. You will see the following options:
ADVANCE BACKUP
CAMERA USB BACKUP
DETECTION DISK BACKUP
DISPLAY
ALERT
REMOTE
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
There are two backup methods for your choices: USB BACKUP and DISK BACKUP.
1) USB BACKUP
Before making USB backup, please check if:
a) The USB flash drive is supported by your DVR. If not, the message “USB ERROR” will be shown on the screen.
For the list of the compatible USB flash drives, please refer to “APPENDIX 5 COMPATIBLE USB FLASH DRIVE
BRAND” at page 91.
b) The format of your USB flash drive is "FAT 32". If no, please format it to “FAT 32” in your PC.
Create PDF files without this message by purchasing novaPDF printer ( http://www.novapdf.com )