Water gardens – Atlantic Water Gardens Pro Series PS4600 User Manual

Page 3

Advertising
background image

3

POND VOLUME

It is important to calculate the estimated water volume before you begin construction, and
then re-calculate final water volume when your project is completed. Estimating water volume
pre-construction is a step that is often skipped by many homeowners and contractors. A
water garden with undersized filtration can prove to be a maintenance nightmare.

Water Gardens

LENGTH

WIDTH

DEPTH

Figure 1.

Use the product specification/cross reference guide on page 2 to verify
the maximum pond volume and flow rates for Pro Series Equipment.

TO DETERMINE POND VOLUME
Multiply (in feet) the average length x the average width x the average depth to find cubic
feet of pond volume. Multiply cubic feet x 7.48 = gallons

SURFACE AREA

When using any pond skimmer it is important to keep the surface area (in square feet) of the
pond in mind. Upon start-up, the pump sends water from the bottom reservoir to the top of
the waterfall and/or streambed. The water must then fill, from top to bottom, the waterfalls
and streambed until it eventually re-enters the pond and the water levels equalize. During the
water in transition process, the water level of the bottom reservoir is continually dropping. If
the streambed is built improperly, or is built too big, the water level of the bottom reservoir
could drop below the opening in the skimmer before the water levels equalize. This would
result in the pump running dry and starving for water.
This situation can be easily avoided by using the formula provided to calculate the surface area
of your pond. With that number, you can then determine the maximum surface area of waterfalls
and streambed that your pond can accomodate.

TO DETERMINE SURFACE FOOTAGE

Multiply (in feet) the average length x the average width = total square feet of the pond
surface area. Multiply the surface area of the pond x .5 = maximum surface area for falls

10’

5’

3’3”

8’

Figure 2.

10’ x 5’ = 50sq ft pond surface area

50sq ft x .5 = 25sq ft stream surface area

Advertising