Eneo PXD-2080MIR D - Manual (Page 12)

Installation Instructions
12
• Extreme care should be taken NOT to scratch the bubble dome surface while
the camera installing or adjusting.
• Care should be taken the cable is NOT to be damaged, kinked or exposed in
the hazardous area.
• Tighten enough the dome cover fixing screws so that there should be NO gap
between Lens hood and clear bubble to avoid the light inflow from IR LEDs.
Limit of pan & tilt
Zoom & focus adjustments
1) Pan limit:
Pan is limited to +/- 173°.
Do NOT force to rotate the gimbal over the limit to prevent from the internal
damage.
2) Tilt limit:
Tilt is limited to 25° min ~ 90° max. with reference to the ceiling when the
inclination of camera module is 0°, that is, the image is aligned horizontally.
3) Inclination limit (Horizontal image alignment):
Inclination limited to +/-63.8° max.
CAUTION
• Turn the Focus gear to “N”(Near) or “∞”(Far)
until the sharpest focus is made.
• To widen the viewing angle, turn the Zoom to
“W”(Wide) and to obtain a closer view, turn it
to “T”(Tele)
25
º
90
º
Use the focus driver supplied.
MEGA-PIXEL NETWORK CAMERA