Eneo PXD-2080MIR D - Manual (Page 14)

Operating Instructions
14
Setup menu can be accessed and controlled by OSD control joy stick on the
side of camera unit.
Five commands are available with the joy stick.
The design of OSD could be different according to the Model.
Using OSD controller
Joy Stick
Video Sub-out Connector
MEGA-PIXEL NETWORK CAMERA
Description of the joystick operation
1) SET Key (●) : Access to the menu or enter the setting.
To enter the main menu, press the Set Key down for about 1.5sec
2) UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move
the cursor up or down.
3) LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu.
Used to adjust the desired menu selection and to move the cursor left
or right.
4) ‘☟’denotes the long press down straightly for about 2 seconds
Description of the DIGITAL ZOOM* adjustment
1) ▲ : Zoom In
2) ▼ : Zoom Out
(*) Works only when OSD Menu is inactive and IP is not connected.
(**) Set to pointing zoom ON for D-Zoom control.