Eneo PXD-2080Z03 D - Manual (Page 22)

Operating Instructions
22
NETWORK AF ZOOM CAMERA
Reverses the video left and right and/or up and down by
MIRROR/FLIP.
No Mirror, No Flip : Normal display without mirroring or flipping
No Mirror, Flip : Video is reversed upside down.
Mirror, No Flip : Video is reversed left and right.
Mirror, Flip : Video is reversed left and right and upside down.
When the video is reversed by Ver. or HV, then the joystick
directions are reversed accordingly. This feature is very useful
when a camera is installed in upside down.
No Mirror,
No Flip
MIRROR /
FLIP
DEFOG OFF AUTO – Enhances the foggy video automatically according to
status of scene.
MANUAL –Sets to enhance the foggy video manually regardless
of status of scene
DEFOG
Weight
MID LEVEL – LOW, MID, HIGH
Video quality can be less in normal environments.
DISPLAY
Zoom Ratio
OFF ON enables to display the Zoom Ratio on the bottom right
corner. OZx.x appears during the optical zoom and DZx.x will
display by multiplying the optical zoom ratio and the actual digital
zoom ratio.
DISPLAY ID OFF
OFF
ON enables to display Camera ID on Monitor.
DISPLAY FOCUS
INDICATOR
ON ON enables to display the Focus Indicator on Monitor
ON enables to display Camera Tittle on Monitor. DISPLAY Tittle
AUTO IR LED Control(AUTO/OFF) is available with IR LED model only.
If IR LED is set to OFF, IR LED will be turned OFF but DAY or
NIGHT is still determined by the built-in light photo sensor.
Lens initialization is necessary during the installation or the
regular operation to align the position data with the mechanical
positions whose lens elements may move and deviate from its
calibrated position by the shock or vibration, for example, during
the transportation.
LENS INIT checks the positions for zoom and focus at both of
the end positions and saves them for the references.
Lens initialization is automatically executed at power up.
IR LED
Control
LENS
INITIALIZE
[ CAUTION ]
It is strongly necessary to execute LENS INIT in cases below;
1) At the final step for the installation.
2) When focus becomes out of control by the shock or vibration.