Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 108)

www.ensembledesigns.com Page 108
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Take Command
Description: This command requests a Take of a previously set preset source to the specified
destination.
Syntax:
Message
Header:
<CR><Adr High><Adr Low><Len High><Len Low>
Cmd Data:
T<Dest High><Dest Low>
T ASCII character ‘T’ identifies this as Take cmd.
<Dest High> High byte of Destination number.
Any valid ASCII hex digit. (E.g. ‘0’ to ‘9’ or ‘A’ to ‘F’).
<Dest Low> Low byte of Destination number.
Any valid ASCII hex digit. (E.g. ‘0’ to ‘9’ or ‘A’ to ‘F’).
Example: Request a Take of the previous set preset source to Destination 4.
Request: In Hex 0D 30 30 30 33 54 30 34
In ASCII <CR> 00 03 T 04 (spaces for readability only)
Response: No serial response. If a preset source had previously been set for Destination 4, the
router now switches that source to Destination 4.