Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 109)

www.ensembledesigns.com Page 109
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
All Take Command
Description: This command requests a Take of all previously set preset sources to their respective
destinations.
Syntax:
Message
Header:
<CR><Adr High><Adr Low><Len High><Len Low>
Cmd Data:
A
A ASCII character ‘A’ identifies this as All Take command.
Example: Request a Take of all the previously set preset sources to their respective destinations.
Request: In Hex 0D 30 30 30 31 41
In ASCII <CR> 00 01 A (spaces for readability only)
Response: No serial response. All preset sources are switched to their respective destinations.