H3C Technologies H3C S12500-X Series Switches - Manual (Page 22)

13
To convert among the three FCoE modes, first convert the switch to non-FCoE mode. After converting the
switch to non-FCoE mode, FCoE-related configurations in the original FCoE mode are cleared.
To configure an FCoE mode for a switch:
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure an FCoE mode
for the switch. fcoe-mode { fcf | npv |
transit } By default, a switch operates in non-FCoE
mode.
3. Display the FCoE mode of
the switch.
display fcoe-mode
This command can be executed in any
view.