H3C Technologies H3C S10500 Series Switches - Manual (Page 326)

311
To do… Use command to… Remarks
Enter system view system-view ––
Enable an IS-IS process and enter
IS-IS view
isis [ process-id ]
Required
Not enabled by default
Configure the network entity title
for the IS-IS process
network-entity net
Required
Not configured by default
Enable IPv6 for the IS-IS process ipv6 enable
Required
Disabled by default
Return to system view quit ––
Enter interface view
interface interface-type
interface-number
––
Enable IPv6 for an IS-IS process on
the interface
isis ipv6 enable [ process-id ]
Required
Disabled by default
Configuring IPv6 IS-IS routing information control
Configuration prerequisites
Complete the IPv6 IS-IS basic function configuration before configuring this task.
Configuration procedure
Follow these steps to configure IPv6 IS-IS routing information control:
To do… Use command to… Remarks
Enter system view system-view ––
Enter IS-IS view isis [ process-id ] ––
Define the priority for IPv6 IS-IS
routes ipv6 preference { route-policy
route-policy-name | preference } * Optional
15 by default
Configure an IPv6 IS-IS summary
route
ipv6 summary ipv6-prefix prefix-length
[ avoid-feedback | generate_null0_route |
[ level-1 | level-1-2 | level-2 ] | tag tag ] *
Optional
Not configured by
default
Generate an IPv6 IS-IS default
route
ipv6 default-route-advertise [ [ level-1 |
level-1-2 | level-2 ] | route-policy
route-policy-name ] *
Optional
No IPv6 default route is
defined by default.
Configure IPv6 IS-IS to filter
incoming routes
ipv6 filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name | route-policy
route-policy-name } import
Optional
No filtering policy is
defined by default
Configure IPv6 IS-IS to
redistribute routes from another
routing protocol
ipv6 import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | [ level-1 | level-1-2
| level-2 ] | route-policy route-policy-name |
tag tag ] *
Optional
Not configured by
default