Verifying the configuration – H3C Technologies H3C SR8800 User Manual

Page 133

Advertising
background image

124

[RouterB-GigabitEthernet3/1/1] vrrp vrid 1 virtual-ip 192.168.0.10

[RouterB-GigabitEthernet3/1/1] vrrp vrid 1 track 1 switchover

[RouterB-GigabitEthernet3/1/1] return

Verifying the configuration

# Display the detailed information of VRRP group 1 on Router A.

<RouterA> display vrrp verbose

IPv4 Standby Information:

Run Mode : Standard

Run Method : Virtual MAC

Total number of virtual routers : 1

Interface GigabitEthernet3/1/1

VRID : 1 Adver Timer : 1

Admin Status : Up State : Master

Config Pri : 110 Running Pri : 110

Preempt Mode : Yes Delay Time : 0

Auth Type : None

Virtual IP : 192.168.0.10

Virtual MAC : 0000-5e00-0101

Master IP : 192.168.0.101

# Display the detailed information of VRRP group 1 on Router B.

<RouterB> display vrrp verbose

IPv4 Standby Information:

Run Mode : Standard

Run Method : Virtual MAC

Total number of virtual routers : 1

Interface GigabitEthernet3/1/1

VRID : 1 Adver Timer : 1

Admin Status : Up State : Backup

Config Pri : 100 Running Pri : 100

Preempt Mode : Yes Delay Time : 0

Auth Type : None

Virtual IP : 192.168.0.10

Master IP : 192.168.0.101

VRRP Track Information:

Track Object : 1 State : Positive Switchover

# Display information about track entry 1 on Router B.

<RouterB> display track 1

Track ID: 1

Status: Positive

Duration: 0 days 0 hours 0 minutes 32 seconds

Notification delay: Positive 0, Negative 0 (in seconds)

Reference object:

BFD session:

Packet type: Echo

Interface : GigabitEthernet3/1/1

Remote IP : 192.168.0.101

Local IP : 192.168.0.102

Advertising
This manual is related to the following products: