Leds, Interface specifications – H3C Technologies H3C SR6600-X User Manual
Page 26

18
(5) SFP port loopback/alarm LED (LP/AL)
Figure 15 Front panel of HIM-AL2P
(1) Captive screw
(2) Ejector lever
(3) SFP port
(4) SFP port carrier signal LED (LINK/ACT)
(5) SFP port loopback/alarm LED (LP/AL)
LEDs
Table 17 LED description
LED Status
Description
LINK/ACT
(Green)
Off
No link is present.
On
A 155.52 Mbps link is present.
Flashing
The SFP port is receiving or sending data at 155.52 Mbps.
LP/AL
(Yellow)
Off
No loopback or alarm exists.
On
The port is in loopback state.
Flashing
There is a minimum of one alarm.
Interface specifications
Table 18 Interface specifications
Item Specification
Connector type
SFP/LC
Number of interfaces
•
HIM-AL1P: 1
•
HIM-AL2P: 2
Interface standards
SONET OC-3C/SDH STM-1
Interface speed
155.52 Mbps
Optical
transit
power
Type
Short distance
Medium distance
Long distance
Ultra-long
distance
Min.
–19.0 dBm
–15.0 dBm
–5.0 dBm
–5.0 dBm
Max.
–14.0 dBm
–8.0 dBm
0 dBm
0 dBm