H3C Technologies H3C SR6600-X - Manual (Page 61)

53
Item Specification
Network
synchronization
Supported
1588v2.2 protocol Supported
Interface standards 802.3, 802.3u, and 802.3ab
Transmit
power
Type
Short-distance,
multi-mode
(850 nm)
Medium-distance
, single-mode
(1310 nm)
Long-distanc
e (1310 nm) Long-distance
(1550 nm)
Super long
distance
(1550 nm)
Min. –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Max. 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receive sensitivity –17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Operating mode 1000 Mbps, full duplex
Table 62 Transceiver modules available for the SFP ports
Transceiver
module model
Central
wavelength Connector Optical fiber
Data rate
Max transmission
distance
SFP-GE-SX-MM850-
A
850 nm LC
62.5/125 μm,
multi-mode
1250 Mbps 0.55 km (0.34 miles)
SFP-GE-LX-SM1310-
A
1310 nm LC
9/125 μm,
single-mode
1250 Mbps 10 km (6.21 miles)
SFP-GE-LH40-SM13
10
1310 nm LC
9/125 μm,
single-mode
1250 Mbps 40 km (24.86 miles)
SFP-GE-LH40-SM15
50
1550 nm LC
9/125 μm,
single-mode
1250 Mbps 40 km (24.86 miles)
SFP-GE-LH70-SM15
50
1550 nm LC
9/125 μm,
single-mode
1250 Mbps 70 km (43.50 miles)
Table 63 Combo copper port specifications
Item Specification
Connector type RJ-45
Interface type Auto MDI/MDI
Frame format supported
• Ethernet_II
• Ethernet_SNAP
Interface speed and duplex
mode
10 Mbps auto-sensing Full/half duplex, auto-negotiation
100 Mbps auto-sensing Full/half duplex, auto-negotiation
1000 Mbps auto-sensing Full duplex, auto-negotiation
For the combo fiber port specifications, see Table 61 . For the transceiver module available for the combo
fiber ports, see Table 62 .