H3C Technologies H3C SR6600-X - Manual (Page 62)

54
Table 64 SFP+ port specifications
Item Specification
Connector type LC
Transceiver module SFP+
Network
synchronization
Supported
1588v2.2 protocol Supported
Interface standards 802.3ae
Transmit
power
Type
Short-distance,
multi-mode
(850 nm)
Medium-distance
, (1310 nm) Long-distanc
e (1310 nm) Long-distance
(1550 nm)
Super long
distance
(1550 nm)
Min. –7.3 dBm –6.5 dBm –8.2 dBm –4.7 dBm 0 dBm
Max. –1 dBm 0.5 dBm 0.5 dBm 4 dBm 4 dBm
Receive sensitivity –7.5 dBm –6.5 dBm –10.3 dBm –11.3 dBm –24 dBm
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Fiber type
50/125 μm
and 62.5/125
μm multi-mode
50/125 μm and
62.5/125 μm
multi-mode
9/125 μm
single-mode 9/125 μm
single-mode 9/125 μm
single-mode
Operating mode 10 Gpbs, full duplex
Table 65 Transceiver modules available for the SFP+ ports
Model
Central
wavelength Connector Optical fiber
Max transmission
distance
SFP-XG-SX-MM850-A 850 nm LC
50/125 μm multi-mode
optical fiber
300 m (984.25 ft)
SFP-XG-LX-SM1310 1310 nm LC
9/125 μm single-mode
optical fiber
10 km (6.21 miles)
SFP-XG-LH40-SM1550 1550 nm LC
9/125 μm single-mode
optical fiber
40 km (24.86 miles)
Table 66 SFP+ DAC cable available for the SFP+ ports
Model Length Data rate Remarks
LSWM1STK 0.65 m (2.13 ft)
10.31 Gbps Used for connecting SFP+ ports
LSWM2STK 1.2 m (3.94 ft)
LSWM3STK 3 m (9.84 ft)
LSTM1STK 5 m (16.40 ft)
NOTE:
Use transceiver modules provided by H3C only. The router might be incompatible with other transceiver
modules.