Example for filtering data by conditional match, Network requirements, Configuration procedure – H3C Technologies H3C MSR 5600 User Manual
Page 165
152
<IfIndex>2688</IfIndex>
<Description>Ten-GigabitEthernet6/0/2:4
Interface</Description>
</Interface>
<Interface>
<IfIndex>2689</IfIndex>
<Description>Ten-GigabitEthernet6/0/3:1
Interface</Description>
</Interface>
<Interface>
<IfIndex>2690</IfIndex>
<Description>Ten-GigabitEthernet6/0/3:2
Interface</Description>
</Interface>
<Interface>
<IfIndex>2691</IfIndex>
<Description>Ten-GigabitEthernet6/0/3:3
Interface</Description>
</Interface>
<Interface>
<IfIndex>2692</IfIndex>
<Description>Ten-GigabitEthernet6/0/3:4
Interface</Description>
</Interface>
</Interfaces>
</Ifmgr>
</top>
</data>
</rpc-reply>
Example for filtering data by conditional match
Network requirements
Retrieve data in the Name column with the ifIndex value not less than 5000 in the Interfaces table under
the Ifmgr module.
Configuration procedure
# Enter XML view.
<Sysname> xml
# Exchange capabilities.
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<capabilities>
<capability>
urn:ietf:params:netconf:base:1.0
</capability>
</capabilities>
</hello>