H3C Technologies H3C MSR 5600 - Manual (Page 39)

26
Step Command Remarks
5. Configure
threshold
monitoring.
• Monitor the operation duration (not
supported in the UDP jitter and voice
operations):
reaction item-number checked-element
probe-duration threshold-type { accumu
late
accumulate-occurrences | average |
consecutive consecutive-occurrences }
threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
• Monitor failure times (not supported in the
UDP jitter and voice operations):
reaction item-number checked-element
probe-fail threshold-type { accumulate
accumulate-occurrences | consecutive
consecutive-occurrences } [ action-type { none
| trap-only } ]
• Monitor the round-trip time (only for the in
UDP jitter and voice operations):
reaction item-number checked-element rtt
threshold-type { accumulate
accumulate-occurrences | average }
threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
• Monitor packet loss (only for the UDP jitter
and voice operations):
reaction item-number checked-element
packet-loss threshold-type accumulate
accumulate-occurrences [ action-type { none
| trap-only } ]
• Monitor the one-way jitter (only for the UDP
jitter and voice operations):
reaction item-number checked-element
{ jitter-ds | jitter-sd } threshold-type
{ accumulate accumulate-occurrences |
average } threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
• Monitor the one-way delay (only supported in
the UDP jitter and voice operations):
reaction item-number checked-element
{ owd-ds | owd-sd } threshold-value
upper-threshold lower-threshold
• Monitor the ICPIF value (only for the voice
operation):
reaction item-number checked-element icpif
threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
• Monitor the MOS value (only for the voice
operation):
reaction item-number checked-element mos
threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
N/A