H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 163
152
delivering them to the CPU. As a result, the receiving port will not be dynamically assigned to the
corresponding VLAN.
To set a port to operate in automatic voice VLAN assignment mode:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the voice VLAN aging
time.
voice vlan aging minutes
Optional.
By default, the aging time of a voice
VLAN is 1440 minutes.
The voice VLAN aging time
configuration is only applicable on
ports in automatic voice VLAN
assignment mode.
3.
Enable the voice VLAN
security mode.
voice vlan security enable
Optional.
By default, the voice VLAN security
mode is enabled.
4.
Add a recognizable OUI
address.
voice vlan mac-address oui mask
oui-mask [ description text ]
Optional.
By default, each voice VLAN has
default OUI addresses configured. For
the default OUI addresses of different
vendors, see
.
5.
Enter Ethernet interface
view.
interface interface-type
interface-number
N/A
6.
Configure the link type of
the Ethernet interface.
•
port link-type trunk
•
port link-type hybrid
Use one of the commands.
7.
Configure the port to
operate in automatic voice
VLAN assignment mode.
voice vlan mode auto
Optional.
By default, the automatic voice VLAN
assignment mode is enabled.
The voice VLAN assignment modes on
different ports are independent of one
another.
8.
Enable the voice VLAN
feature.
voice vlan vlan-id enable
By default, the voice VLAN feature is
disabled.
Configuring a port to operate in manual voice
VLAN assignment mode
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable the voice VLAN
security mode.
voice vlan security enable
Optional.
By default, the voice VLAN security
mode is enabled.