H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 55)

44
Step Command Remarks
3. Configure the load sharing
criteria for the aggregation
group.
link-aggregation load-sharing mode
{ destination-ip | destination-mac |
source-ip | source-mac } * The default load sharing criteria
are the same as the global load
sharing criteria.
In Layer 2 aggregate interface view, the WX5540E switching engine supports the following load sharing
criteria and combinations:
• Load sharing criteria automatically determined based on the packet type
• Source IP address
• Destination IP address
• Source MAC address
• Destination MAC address
• Destination IP address and source IP address
• Destination MAC address and source MAC address
Displaying and maintaining Ethernet link
aggregation
Task Command Remarks
Display information about an
aggregate interface or multiple
aggregate interfaces.
display interface [ bridge-aggregation ] [ brief
[ down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface bridge-aggregation
interface-number [ brief ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display the local system ID.
display lacp system-id [ | { begin | exclude |
include } regular-expression ] Available in any
view.
Display the global or group-specific
link-aggregation load sharing
criteria.
display link-aggregation load-sharing mode
[ interface [ bridge-aggregation
interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display detailed link aggregation
information for link aggregation
member ports.
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display summary information about
all aggregation groups. display link-aggregation summary [ | { begin |
exclude | include } regular-expression ] Available in any
view.
Display detailed information about a
specific or all aggregation groups.
display link-aggregation verbose
[ bridge-aggregation [ interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Clear LACP statistics for a specific or
all link aggregation member ports.
reset lacp statistics [ interface interface-list ]
Available in user
view.
Clear statistics for a specific or all
aggregate interfaces. reset counters interface [ bridge-aggregation
[ interface-number ] ] Available in user
view.