Grass Valley 8939FCA - Manual (Page 10)

10 8939FCA/FCB — Instruction Manual
Installation
Installation
Each 8939FCA and 8939FCB model consists of a single passive rear module
that can only be installed in the rear of a GeckoFlex frame.
Installation of the 8939 rear module is a process of:
1. Placing the 8939 module in an unused rear frame slot,
2. Cleaning all fiber optic connectors and cable end faces with required
cleaning kit (see
Fiber Optic Cleaning Requirement on page 11 ), and
3. Cabling the signal ports.
All GeckoFlex front and rear modules can be inserted and removed from an
GeckoFlex frame with power on.
Module Placement in the GeckoFlex Frame
There are ten front and rear cell locations in the 2 RU GeckoFlex frame
(
Figure 1 ) to accommodate either audio, analog and digital video modules.
Figure 1. GeckoFlex Frame