Grass Valley Acappella v.3.1.0 - Manual (Page 39)

Acappella — Instruction Manual 39
Section
3
Panel Operation
Local Panels and Remote panels expand the functionality of the Acappella
router.
A frame that has 8 Inputs, 4 Outputs, digital video and Dual Stream digital
AES audio, would have three Levels of 8 inputs and 4 Outputs as follows:
• Eight inputs and four outputs of video,
• Eight inputs and four outputs of audio, and
• A second set of eight inputs and four outputs of audio.
The On Indicators will be lit when there is power to the panel. See Figure 1 .
Button illumination will be either Off, Backlit, Low Tally, or High Tally
depending on the button’s status.
Figure 1. 16x8 Local Panel Layout
8300_00_52r0
1
1
2
2
3
3
4
4 Lvl 1 Lvl 2 Lvl 3 Lvl 4
5
5
6
6
7
7
8 9 10 11 12 13 14 15 16
8 Enab Prot
Levels
On Indicators
Destinations
Sources
Protect Enable
Enable Button
The Enable button is green and is found on the lower right of the panel. See
Figure 1 .
Enable Button Action
Press and release of an active Enable button causes the following actions:
• Deactivates the panel,
• Inactive Enable button is illuminated at Backlight Tally, and
• The Protect and Source buttons do not operate.