Grass Valley EDIUS Pro v.7.0 - Manual (Page 54)

Editing
46 EDIUS - User Guide
The mapping is specified so that video and audio channels 1 and 2 are placed on the 1VA track, audio channels 3
and 4 on the 1A track, audio channels 5 and 6 on the 2A track, and audio channels 7 and 8 on the 3A track.
2 Click on the track patch of the unnecessary source channel to disconnect it.
Each click connects/disconnects it alternately.
3
•
To change the destination to connect the source channel, drag and drop the track patch of the source channel to
be changed to the new destination track patch.
• To place an audio source channel as a monaural channel or stereo channel, right-click on the track patch of the
audio and click [Audio Source Channel (Stereo)]. Each click switches between the monaural channel and stereo
channel modes.
Clip Composition
Moving Clips
Drag a clip placed on the timeline, and drop it onto the destination. Clips can be moved to any desired position,
including different tracks. You can also move multiple clips at the same time.
(1) Video part Indicate the presence of video in the clip.
(2) Audio part Indicate the presence of audio in the clip. Expand it to display a rubber band
to adjust the volume or pan.
(3) Mixer part Configure keying and other settings.
(1)
(2)
(3)