Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 162)

Binding disk modules - Redundant K2 SAN
Prerequisites for the K2 RAID chassis are as follows:
• Fibre Channel cable(s) connected
• Ethernet cable(s) connected
• Power on
Prerequisites for the optional K2 RAID Expansion chassis (if present) are as follows:
• Fibre channel cable(s) connected
• Power on
NOTE: Binding destroys all user data on the disks.
1. If you have not already done so, launch Storage Utility from the K2Config application.
2. As prompted, wait while Storage Utility gathers system information, then Storage Utility opens.
162 K2 SAN Installation and Service Manual 18 November 2010
Configuring and licensing the K2 SAN