Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 206)

• VLANs set up
• Trunks set up
• Power on
K2 Media Server
• Ethernet cables connected
• Fibre Channel cable connected
• Redundant servers connected by serial cable
• Software installed, as from the factory, including QuickTime 7
• MPIO software installed.
• Control network IP address assigned
• Power on for all servers
K2 RAID chassis
• Fibre Channel cable(s) connected
• Ethernet cable(s) connected
• Power on
K2 RAID Expansion chassis (optional)
• Fibre channel cable(s) connected
• Power on
Defining a new K2 SAN
If you import a SiteConfig system description file, you do not need to define a new K2 SAN. You
can skip this task and instead start by configuring the first K2 Media Server.
1. On the control point PC, open the K2Config application.
A login dialog box opens.
206 K2 SAN Installation and Service Manual 18 November 2010
Configuring and licensing the K2 SAN