Extron Electronics MAV Series - Manual (Page 33)

3-9 MAV Series Switchers • Operation
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC VIDEO AUDIO
12
9 10 11 12 8
CONTROL I/O
13
13
14
14
15
15
16
16
C
2 7 6 5
VIEW
B VIDEO AUDIO
C
ESC
A
F
LED key: = off, = on,
= flash once F
Press
Press
Press
Press
Figure 3-8 — Example 4: Viewing the current configuration
D
Press and release the input 5 button (figure 3-9). The input 5 LED lights.
If ties are established for input 5, all output LEDs toggle; outputs with no ties
turn off and the LEDs associated with all outputs tied to input 5 (audio, video,
or audio and video ties) light. If no ties are established for input 5, all output
LEDs turn off.
If audio is broken away, the Audio LED blinks.
A set of ties can also be viewed by selecting a tied output. To demonstrate this,
note the number of a lit output LED, and press and release the output button
for an unlit (untied) output LED. Observe that all of the untied outputs light.
Then press the output button for the output LED noted previously and observe
that the selected output LED, the tied input LED (input 5), and the output
LEDs light for all of the outputs that are tied to the input.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC VIDEO AUDIO
12
9 10 11 12 8
CONTROL I/O
13
13
14
14
15
15
16
16
B
VIDEO AUDIO
D
5
B
D
D
1 8 4 3
LED key: = off, = on, = blinking Press
Figure 3-9 — Example 4, step D: Viewing the current configuration,
video and audio
E
Press and release the Video button to toggle the Video LED off (figure 3-10). If
audio is broken away, the Audio LED stops blinking and lights.
If audio ties are established for input 5, the output LEDs for all audio outputs
tied to input 5 light. If no ties are established for input 5, all output LEDs turn
off.