HEIDENHAIN TNC 310 (286 140) Pilot - Manual (Page 56)

5 6
Special Cycles
Spindle ORIENTATION
CYCL DEF: Select Cycle 13 ORIENTATION
Enter the orientation angle referenced to the angle reference axis
of the working plane:
• Input range 0 to 360°
• Input resolution 0.1°
Call the cycle with M19
The machine and TNC must be prepared for spindle orientation
by the machine tool builder.
12 CYCL DEF 13.0 ORIENTATION
13 CYCL DEF 13.1 ANGLE 90