Optional accessories, T (p.100) – Epson ELP-600 User Manual

Page 102

Advertising
background image

100

Optional Accessories

The following optional accessories are available for purchase if required. This
list of optional accessories is current as of April 2002. Details of accessories are
subject to change without notice.

* A special method of installation is required in order to suspend the projector from the ceiling. Please

contact the place of purchase if you would like to use this installation method.

Hard travel case

ELPKS26

Soft carrying case

ELPKS27

Use this case if you need to carry the projector by
hand.

Spare lamp

ELPLP15

Use as a replacement for spent lamps.

Portable screen (50 inch)

ELPSC06

A compact screen which can be carried easily.

60 inch screen

ELPSC07

80 inch screen

ELPSC08

Computer cable

ELPKC02

(1.8 m (6 ft.) - for mini D-Sub 15-pin/mini D-
Sub 15-pin)

Use to connect the projector to a computer when
you would like to use UXGA display resolution.

Computer cable

ELPKC09

(3 m (9.8 ft.) - for mini D-Sub 15-pin/mini D-
Sub 15-pin)
Computer cable

ELPKC10

(20 m (65.6 ft.) - for mini D-Sub 15-pin/mini
D-Sub 15-pin)

Use this extension cable if the accessory
computer cable is too short.

Computer cable

ELPKC11

(1.8 m (6 ft.) - for mini D-Sub 15-pin/5BNC)

Use to connect the projector to a workstation.

Digital video cable

ELPKC20

(3 m (9.8 ft.) - DVI-D male-male)

DVI cable for connecting the projector to a
computer with a digital RGB output interface.

Digital video cable

ELPKC21

(3 m (9.8 ft.) - for DVI-D/DFP 20-pin)

DFP cable for connecting the projector to a
computer with a digital RGB output interface.

DVI analog cable

ELPKC25

(3 m (9.8 ft.) - for DVI-I/mini D-Sub 15-pin)

Use to connect the projector to connect two
computers with analog RGB output to the
projector.

Component video cable

ELPKC19

(3 m (9.8 ft.) - for mini D-Sub 15-pin/RCA x 3)

Use to connect a component video source.

Remote control receiver

ELPST04

Use to control the projector with the remote
control from a distance.

Ceiling mount *

ELPMB07

Use when installing the projector to a ceiling.

Ceiling plate *

ELPFC03

Pipe 370 (370 mm (14.57 inches)/silver)*

ELPFP04

Pipe 570 (570 mm (22.4 inches)/silver)*

ELPFP05

Pipe 770 (770 mm (30.3 inches)/silver)*

ELPFP06

Use when installing the projector to a high ceiling
or a ceiling with veneer panels.

Image presentation camera

ELPDC02
ELPDC03
ELPDC04

Use when projecting books, OHP films and
slides.

Advertising
This manual is related to the following products: