Epson ELP-600 - Manual (Page 24)

22
Use the optional computer cable to connect the Computer 2/Component Video
port at the rear of the projector to the monitor port of the computer.
See “Appendix: Optional Accessories” (P.100)
Tip :
• After making the connections, change the Comp2/YCbCr Input setting in the Setting
menu to Analog-RGB. (P.69)
• Do not bind the power cord and the computer cable together, otherwise image
interference or errors in operation may result.
If the monitor port is a 5BNC port
To Computer 2/
Component Video port
To monitor port
Computer cable
(optional)
Connecting to a Computer