Epson ELP-600 - Manual (Page 61)

59
3 Tilt the button on the remote control up, down or to the left
or right to move the item displayed around the screen.
Effect 1: The pointer icon moves.
Effect 2: The spotlight moves.
Effect 3: Horizontal bars are moved vertically, and vertical bars are moved
horizontally.
4 For effect 1, move the icon to the place where you would like it
to be stamped, and then press the
button.
Tip :
• Only one type of effect can be displayed at any one time. If you press a different effect
button while using an effect function, the current effect will be canceled and the effect
function for the new button pressed will start.
• The normal wireless mouse function of the remote control cannot be used while an
effect function is in use.
• If the effect function is used while the keystone correction amount is near the limit
value, the keystone correction amount may change.
Press a button other than the [1], [2], [3], or [Left] buttons. The effect
function will be canceled and the items which were drawn on the screen will
disappear.
Canceling effects