Epson ELP-600 - Manual (Page 16)

14
Using the Remote Control and Remote Operating Range
The remote control is used in the following way.
Procedure
1 Set the R/C switch on the remote
control to the ON position.
2 Point the remote control
transmitter toward one of the
remote control receivers on the
projector and operate the remote
control buttons.
Tip :
• Do not allow sunlight or light from fluorescent lamps to shine directly onto the
projector's remote control receivers, otherwise it may interfere with the reception of
signals from the remote control.
• Set the R/C switch on the remote control to the OFF position when not using the remote
control. Leaving the R/C switch on will consume battery power.
Use the remote control within the ranges indicated below. If the distance or
angle between the remote control and the remote control receiver is outside the
normal operating range, the remote control may not work.
Using the Remote Control
Remote Operating Range
Operating distance Operating angle
Approx. 10 m (30 ft.)
Approx. ±30
°
horizontally
Approx. ±15
°
vertically
Power A/V Mute Freeze
E-Zoom
Esc
Menu
Comp1
Source
Video Auto
Preset
Volume
P in P
S-Video Resize
Comp2/YCbCr
Help
Remote control
receiver (front)
Power
A/V Mute Freeze
E-Zoom
Esc Menu
Comp1
Source
Video Auto
Preset
Volume
P in P
S-Video Resize
Comp2/YCbCr
Help
Remote control
receiver (back)
Before Using the Remote Control