Epson ELP-600 - Manual (Page 48)

46
Adjusting the Image Quality
The quality of the screen images can be adjusted as follows.
Focusing the Screen Image
Procedure
Turn the focus ring to adjust the image
focus.
Turn the focus ring of the projector until the
projected images are in proper focus.
Tip :
• If the surface of the lens is dirty or misted over as a result of condensation, it may not
be possible to adjust the focus correctly. If this happens, clean or de-mist the lens.
(P.91)
• If the projector is positioned outside the normal projecting range of 0.9 – 12.4 m (3.0 –
40.7 ft.), it may not be possible to obtain the correct focus. If you have trouble
obtaining the correct focus, check the projection distance.
Adjusting Computer Images
This procedure adjusts computer images to the optimum settings.
Automatic adjustment involves adjustment of the following three items:
Tracking , Display position and Synchronization (Sync) .
Procedure
While an image is being projected from
the computer, press the [Auto] button
on either the remote control or the
projector's control panel.
The screen will appear black while the
adjustment is being made.
Automatic adjustment
Source
Video
Auto
Preset
Volume
P in P
S-Video
Resize
Resize
Sync+
Tracking - Tracking +
Sync-
Menu Esc
Keystone Shift
Auto
Projector Remote control