HEIDENHAIN TNC 320 (340 551-02) - Manual (Page 87)

HEIDENHAIN TNC 320 87
4.6 A
d
ding Comments
4.6 Adding Comments
Function
You can add comments to a part program to explain program steps or
make general notes.
Adding a comment line
8 Select the block after which the comment is to be inserted.
8 Press the SPECIAL TNC FUNCTIONS soft key.
8 Select the COMMENT soft-key.
8 Enter your comment using the screen keyboard (GOTO key) or a
USB keyboard, if available, and conclude the block by pressing the
END key.
Functions for editing of the comment
If the TNC cannot show the entire comment on the
screen, the >> sign is displayed.
Function Soft key
Jump to beginning of comment
Jump to end of comment
Jump to the beginning of a word. Words must be
separated by a space.
Jump to the end of a word. Words must be
separated by a space.
Switch between insert mode and overwrite
mode