Energizer MMT-511 - Manual (Page 116)

104 Chapter 7
If the pump detects a condition; such as, low battery, the test will
not finish. A message will appear indicating the condition that
caused the test to stop.
1. From the HOME screen, press ACT. Press the arrow button
to select Utilities. Press ACT.
2. Press the arrow button to select SELFTEST. Press ACT.
➤ The pump will do the following tests:
You will hear beeps periodically as different mechanisms in the
pump are being tested.
MiniMed
MAIN MENU
Basal
Prime
Utilities
MiniMed
UTILITIES MENU
RF Options
Clear Pump
Selftest