Energizer MMT-511 - Manual (Page 159)

Pump Specifications 147
Prime function
■ Is used to fill the infusion set tubing prior to use.
■ Primes are not counted in daily totals but are recorded
separately in the prime history.
■ Fixed prime: 0.1-25.0 units (limited by maximum bolus).
■ Manual prime: unlimited. Fill rate is 1 to 5 units/second.
Program safety checks
■ Over 50 independent safety systems are continuously
monitoring all pump operations.
■ Maximum infusion with single fault condition: 0.0074 ml.
Pump size
■ The Paradigm pump is 2 x 3 x .77 inches (.8 inches in battery
area) [5 cm x 7.60 cm x 2 cm.]
Pump weight
■ The pump weighs less than 100 grams.
Remote control
■ Uses radio signals to allow users to program normal boluses
or to suspend/resume their pumps.
Reservoir
■ Volume: up to 176 units of insulin.
■ Low reservoir alerts at approximately 30, 20, and 10 units of
insulin remaining for U100. (20 and 10 units for U50)
■ The user-filled reservoir is made from impact-resistant,
insulin-compatible polypropylene.
■ A clear window in the pump case allows users to see the
remaining amount of insulin.