Energizer MMT-511 - Manual (Page 19)

Introduction 7
3. Numbers will appear on the pump screen as the pump turns
on. Then the following screen will appear.
4. If this does not happen:
a. Check to see if the battery is inserted properly. If the battery
has been installed backwards, discard the battery and install
a NEW battery.
b. If the battery is inserted properly and your pump still does
not turn ON, try a new battery (repeat steps 1 through 4).
c. If the pump is still not ON, call the 24-hour Product Help-
line.
5. The software version screen will appear and then the HOME
screen.
6. You can now explore your pump by pressing the buttons and
scrolling through the menus. Refer to Chapter 2: Getting
Started for instructions for programming your pump for use.
If you perform the Rewind function, program your pump or the
Check Settings alarm will occur.
MiniMed
MiniMed