SMA SB 2800i - Manual (Page 36)

Technical Documentation Operating Instructions
34 SMA Regelsysteme GmbH SB2800i-11:FE0504
6.4 Measurement Channels and Messages
If your Sunny Boy 2800i has been equipped with a communication interface, numerous
measurement channels and messages can be acquired. These can help improve the performance
as well as eliminate failures of your plant.
BFR : System control
SRR : Current control
6.4.1 Measurement Channels
E-Total Total power fed to the grid accumulated from the day of installation
Fac Grid frequency
Störung/Failure Display of failure type in „ Failure“ state
h-Total Total sum of operating hours in feeding operation
Iac-Ist Current fed to the grid
Ipv Current from PV-panels
Netz-Ein/Power ON Total number of connections to the grid
Pac Present output power
Riso Insulation resistance of PV plant before the connection to the grid
Seriennummer/Serial
number Serial number of the Sunny Boy
Status/Mode Display of current operating state
Uac/Vac Grid voltage
Upv-Ist/Vpv DC PV input voltage
Upv-Soll /
Vconst-Setpoint PV setpoint voltage
Zac Grid impedance