Yaskawa MECHATROLINK-III - Manual (Page 25)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 62B 1000-Series Option SI-ET3 Installation Manual 25
7.
Replace and secure the front covers of the drive (C, F) and replace the digital
operator (D).
Figure 9
Figure 10 Replace the Front Covers and Digital Operator
Note: Take proper precautions when wiring the option so that the front covers will easily fit back onto
the drive. Make sure no cables are pinched between the front covers and the drive when
replacing the covers.
8.
Set drive parameters in Table 6 for proper option performance.
F
C
D
A1000