Yaskawa DC Power Input Σ-V Series - Manual (Page 23)

5 Compliance with CE Marking
E-21
5 Compliance with CE Marking
5.1 Installation Conditions of EMC Directive
To adapt the EMC directives (EN55011 group1 classA, EN61800-3) for a
combination test using servomotors from the
Σ-V mini series and SERVO-
PACKs from the DC power input Σ-V series, a ferrite core or a noise filter
must be used. For details, read the Installation instructions in DC Power
Input
Σ -V Series User’s Manual Setup Rotational Motor (SIEP S800000
80).
However, because this product is built-in, check that the following condi-
tions are still met after being installed in the final product.
5.2 Conditions Corresponding to Low Voltage
Directive
To adapt SERVOPACKs to the Low Voltage Directive, make sure that the
following environmental conditions are met.
• Pollution degree: 2
• Protection class: IP10
• Altitude: 1000 m max.