Yaskawa Modbus TCP/IP SI-EM3D/V - Manual (Page 25)

Figure 15 Ground Wire Routing
12.
Attach the option to the drive. Properly seat the tabs on the left and right sides of the
option to the drive case.
Line up tabs
Line up tabs
Figure 16 Connect the Option
13.
Connect the ground wire at the option ground terminal. Tighten the screw to 0.5 to
0.6 N
•m or (4.4 to 5.3 in lbs) using an M3 Phillips screwdriver.
5 Installation Procedure
YASKAWA TOEP YAICOM 17A V1000 Option Dual-Port Modbus TCP/IP SI-EM3D/V Installation Manual 25