Yaskawa SmartTrac PS Card - Manual (Page 23)

SMART TRAC PS Card
Technical Manual TM 3554-0030 Appendix C – Removing the Smart Trac Card Stack
••
19
•
Disconnect the card at the 2CN connector on the CPU card.
•
The CPU card is secured with three plastic standoffs with spring-
loaded clips on the end. Squeeze the top of the standoffs (the clips)
with the special cylindrical removal tool, your fingers or needle-
nosed pliers and lift the CPU card from the Smart Trac Inverter
Control Card.
You have removed the entire card stack. The inverter card, considered part of
the drive, is in clear view.