Yaskawa SmartTrac PS Card - Manual (Page 8)

SMART TRAC PS Card
4
••
Smart Trac PS Card Technical Manual TM 3554-0030
Quick Start
1. Remove all Smart Trac cards except the Smart Trac Inverter, CPU and
PG cards per instructions in “Installing the Smart Trac PS Card.”
2. Install the Smart Trac PS card as the fourth card of the card stack.
3. Make connections to the Smart Trac PS card connector CN1 per
information contained in this manual and your situation. (Connector
CN4 is not used except for testing).
4. Replace all other cards on top of the Smart Trac PS card per the
instructions in the “Installing the Smart Trac PS Card.”
5. Power up and test functionality of your Smart Trac AC1, including that
of the Smart Trac PS card
.